User guide

45
Chapter 4 - MultiVOIP Software
are being transferred. If not, that may indicate the web server is not enabled. Or, if you were having
problems establishing a remote connection through TFTP, you could look in the UDP section to see if
any packets are being received. If not, you may need to review your network addressing.
SNMP Statistics
The SNMP Statistics dialog box provides statistical information on Simple Network Management
Protocol (SNMP).
SNMP is an application layer protocol that facilitates the exchange of management information
between network devices. There are three key components in SNMP: the devices that are to be
managed, agents, and the network management systems. The managed device is the network device,
like a router. The agent is the software module residing in the managed device pertaining to network
management. The network management system runs the SNMP application that controls the
managed devices and monitors their status. Four primary operations (Set, Get, Get Next, and Trap)
are performed using SNMP.
Viewing Logs
The Log Entries dialog box displays a chronological history of all calls into and out of this unit. This
dialog box is accessed by clicking Logs in the Statistics dialog box.