User guide

41
Chapter 4 - MultiVOIP Software
When you enter this information and click OK, the information is loaded into the phone directory
database.
To add a second entry, click Add and the Add/Edit Phone Entry dialog box displays again. After the
host entries are added to the database, the same data has to be added for each client MultiVOIP.
To establish the phone directory database for a client MultiVOIP, you do not have to enter phone
numbers, but you have to check the Client option in the Database Type group. When you click the
Client option, the Update Database From group becomes active. Enter the IP address of the Host
MultiVOIP. Once online, the client MultiVOIP will receive the phone directory database from the Host.
Changing IP Parameters
The IP Setup dialog box establishes the IP addressing for the local Ethernet LAN, defines the Internet
gateway address, and for a client MultiVOIP the global-to-local IP address translation is defined on the
Proxy Setup tab. The IP Setup dialog box is accessed by clicking IP on the MultiVOIP 100 Setup
menu.
When the IP Setup dialog box displays, the IP address of your MultiVOIP displays with its IP Mask.
The Gateway Address is the IP address of the device connected to the Internet.