User guide

31
Chapter 3 - Software Loading and Configuration
14. The Call Authentication option enables password protection for outbound and inbound calls on
the voice/fax channel. If you enable password protection on inbound or outbound calls, you
need to also enter a password of up to 14 numeric characters in the Password box.
15. The Automatic Disconnect option limits call duration to the number of seconds entered in the
Disconnect After box. The default value of 180 seconds can be changed to any other value up
to 65,535 (roughly 18.2 hours).
If your country/region is not the default USA, click the Regional tab and proceed to step 15.
Otherwise, proceed to step 16 to begin building your phone directory database.
16. To change the Tone Pairs on the Regional tab, select your specific country or region from the
Country/Region list.
The Tone Pairs group parameters change per your selections. Click OK. The following dialog
box displays.
17. Click OK. After the upgrade is complete, click Start | Programs| MultiVOIP | MultiVOIP Con-
figuration. On the main menu, click Phone Book to display the Phone Directory Database
dialog box.
In the Database Type group, click the Client option. The Update Database From group
becomes active.
18. Enter the IP address of the host MultiVOIP in the Host IP Address box.