Manualshelf

User guide

ManualsBrandsMultitech ManualsComputer equipmentMultiVOIP 100 (MVP110
11121314151617181920
12
Chapter 1 - Introduction and Description
Back Panel Description
The cable connections for the MultiVOIP are made at the back panel. Connectors include Power,
Command Port (RS232), Ethernet (10BASE-T), and the Voice/Fax Channel. The cable connectors are
shown below and defined in the following groups.
MVP110 Back Panel
Power Connector
The Power connector is used to connect the power transformer to the MultiVOIP.
Command Connector
The Command connector is used to configure the MultiVOIP using a PC with an available serial port
and running Windows® software. The Command connector is an RJ-45 jack, and an adapter cable is
provided to convert to a standard serial port DB9 female connector.
Ethernet Connector
The Ethernet connector is used to connect the MultiVOIP to a LAN using unshielded twisted cable.
This connector is an RJ-45 jack.
Phone Connector
Connects the Voice/Fax Channel to a station device such as an analog phone, a KTS phone system,
or a fax machine. This connector is an RJ-11 jack.