User manual

98
10.1.1 Voice Line Sweep Results
Connect Identify Penetrate
Call Type NO SCD w/ SCD NO SCD w/ SCD NO SCD w/SCD
Fax & Carrier
1
st
Call
Timeout Voice Timeout Voice Timeout Voice
2
nd
Call
NO_Facsimile None NO_Facsimile None NO_Facsimile None
Fax only
NO_Facsimile NO_Facsimile NO_Facsimile NO_Facsimile NO_Facsimile NO_Facsimile
Modem only
Timeout Timeout Timeout Timeout Timeout Timeout
If Voice lines consistently identify as Seconds-Based timeout, try increasing the Single Call Detect Voice
Timeout on the options Setup-> sub-tab.
10.1.2 Fax Line Sweep Results
Connect Identify Penetrate
Call Type NO SCD w/ SCD NO SCD w/ SCD NO SCD w/ SCD
Fax & Carrier
1
st
Call
Timeout Fax Timeout Fax Timeout Fax
2
nd
Call
Fax Timeout Fax Timeout Fax Timeout
Fax only
Fax Fax Fax Fax Fax Fax
Modem only
Timeout Timeout Timeout Timeout Timeout Timeout
Fax Misidentifications: Some Faxes will misidentify at the connect level as Fax/Carrier. If this occurs,
please retry those faxes at the Identify level of effort where an actual Fax Group 3 protocol handshake
occurs. We suspect that faxes that misidentify at the Connect level only
Some faxes will continue to misidentify as Fax\Carrier at the Identify and Penetration level of efforts. We
suspect that these Faxes either have undeveloped or undocumented features, or, have modem features for
optional modem connections that can be fully added later.
10.1.3 Modem Line Sweep Results
Connect Identify Penetrate
Call Type NO SCD w/ SCD NO SCD w/ SCD NO SCD w/ SCD
Fax & Carrier
1
st
Call
Carrier
Carrier*
Carrier, System
if Identified
NO_Facsimile
Carrier,
Username/
Password
NO_Facsimile
2
nd
Call
NO_Facsimile NO_Facsimile NO_Facsimile Carrier, System
if Identified
NO_Facsimile Carrier,
Username/
Password
Fax only
NO_Facsimile NO_Facsimile NO_Facsimile NO_Facsimile NO_Facsimile NO_Facsimile
Modem only
Carrier Carrier Carrier, System
if Identified
Carrier, System
if Identified
Carrier,
Username/
Password
Carrier,
Username/
Password