User manual

93
%DATEGEN% The date and time the report was generated.
%DATESTART% The date and time PhoneSweep started scanning.
%DATESTOP% The date and time PhoneSweep stopped scanning.
%DN% Total number of phone numbers dialed in data mode (checked for Carrier).
%DFN% Total number of phone numbers dialed in fax mode.
%DFPC% Percentage of numbers dialed in fax mode.
%DPC% Percentage of assigned numbers dialed in data mode.
%ETIME% Total time spent sweeping phone numbers.
%FN% Total phone numbers called where a fax machine responded.
%FPC% Percentage of dialed numbers that responded with fax.
%ICN% Phone numbers with Carrier attached to systems that were identified
%ICPC% Percent of Carrier numbers for which the system could be identified.
%IPNN% Penetrated phone numbers for which the system was identified.
%IPNPC% Percentage of Penetrated numbers for which systems were identified.
%ON% Total phone numbers that responded with a second dial tone.
%OPC% Percentage of dialed numbers that responded with second dial tone.
%PNN% Total phone numbers that were penetrated
%PNNALLPC% 0% if no systems were penetrated, or 100% if some were.
%RN% Total phone numbers that rang enough times to time out.
%RPC% Percentage of phone numbers that rang long enough to time out.
%SCDN% Total number of phone numbers dialed in Single Call Detect mode.
%SN% Total phone numbers that were screened.
%TN% Total phone numbers with standard timeout.
%TPC% Percentage of dialed numbers with standard timeout.
%UCN% Phone numbers with carrier that could not be identified.
%UCPC% Percentage of phone numbers with Carrier that was not identified.
%UPNN% Phone numbers that were penetrated but could not be identified.
%UPNPC% Percentage of penetrated numbers that were not identified.
%VN% Total phone numbers that responded with Voice.
%VPC% Percentage of dialed numbers that responded with Voice.