User manual

92
Section
Marker
Section Content
#7# Print the Anomaly section. This section contains phone numbers that responded in odd
ways.
#9# Print a list of phone numbers that PhoneSweep successfully Penetrated.
#10# Print modem responses from systems that were successfully Penetrated.
#12# Print all phone numbers that responded with Carrier.
#13# Print all phone numbers that were always Busy.
#14# Print all phone numbers that responded with Second Dial Tone.
#15# Print any areas where the sweep was not completed.
#17# Print all responses from all modems that PhoneSweep connected to. This may be an
extremely long list.
#19# Print the classification of each phone number PhoneSweep dialed.
#21# Print the results, sorted by time, of every call PhoneSweep made.
#25# Print whether PhoneSweep scanned for data modems, fax machines, or both.
#26# Print the phone numbers associated with all systems that PhoneSweep was able to
identify, as well as their identification strings.
#27# Print all unidentified phone numbers that responded with Carrier, as well as any partial
identification information collected.
#28# Print all phone numbers that responded with a Fax signal.
#29# Print all responses from modems that could not be identified by PhoneSweep.
#30# Print the note associated with the profile in question.
#31# Print all phone numbers dialed, without call results.
7.2.2 Report variables in ReportTemplate.RTF
A report variable in ReportTemplate.rtf is replaced by a value when the report is generated. The following
table contains a list of the report variables and their values.
Variable Value
%ALLN% Total number of phone numbers assigned to dial.
%ALLPC% Either 0% if no numbers were dialed or 100% if any numbers were dialed.
%BFPC% Percentage of username/password guessing completed.
%BN% Total number of phone numbers that were always Busy.
%BPC% Percentage of dialed numbers that were always Busy.
%CALLS% Total numbers of calls made by PhoneSweep.
%CN% Total number of phone numbers that responded with Carrier.
%CNALLPC% Either 0% if no numbers responded with Carrier, or 100% if some numbers did.
%CPC% Percentage of dialed numbers that responded with Carrier.