User manual
59
4.5 Setting up your Modems
The Modems sub-tab, located under the Setup tab, displays modem configuration information for only
the number of modems allowed by your PhoneSweep model license. Thus, you will see a line for one
modem for PhoneSweep Basic, four for PhoneSweep Plus, eight for PhoneSweep Plus8, and so on.
For changes to take affect on this sub-tab, you need to select the Save icon along the top of the
PhoneSweep UI.
The Modems sub-tab allows you to:
• Set which modems are to be used by this particular sweep (Select 1, only a few or all; you can
select all modems at once by clicking on the Select All Modems button on the lower right corner
of the Modems sub-tab (black check mark).
• Set which COM (serial) port each modem is connected to.
• Set initialization strings for each modem.
• Control the modems’ speakers individually.
You can set options for all modems at once by using the right-click menu. This provides one-click
setting of use status, speaker setting and init string for all modems to the same value as the item right-