User manual

104
11 Customizing PS Defaults Using the
PhoneSweep.INI file
If you want to change the default values that PhoneSweep uses when it creates a new profile, modify the
phonesweep.ini file. The phonesweep.ini file is a standard Windows INI file. There are currently two
sections, the [globals] section and the [vars] section. All variables are in the form NAME=VALUE, each
on a line by itself. Any variable not present in the file will be set to its standard PhoneSweep default, and
illegal lines will be ignored. If the value you specified is not being set correctly, verify that the variable is
correctly spelled and that the value is appropriate.
Example: Although all modems are by default disabled when PhoneSweep starts, you could enable your
first and second modems on COM1 and COM5 with the following phonesweep.ini file:
#
# PhoneSweep initialization file
#
[globals]
; Do not put your own comments
; in the [globals] section.
; They will be deleted.
FAX-INIT-STRING-1=
FAX-INIT-STRING-2=
FAX-INIT-STRING-3=
FAX-INIT-STRING-4=
MODEM-COM-1=Y
MODEM-COM-2=Y
MODEM-COM-3=N
MODEM-COM-4=N
MODEM-FORCE-HANGUP=N
MODEM-INIT-STRING-1=ATE1Q0V1
MODEM-INIT-STRING-2=ATE1Q0V1
MODEM-INIT-STRING-3=ATE1Q0V1
MODEM-INIT-STRING-4=ATE1Q0V1
MODEM-PORT-1=1
MODEM-PORT-2=5
MODEM-PORT-3=3
MODEM-PORT-4=4
MODEM-SPEAKER-1=1
MODEM-SPEAKER-2=1
MODEM-SPEAKER-3=1
MODEM-SPEAKER-4=1
[vars]
SEQUENTIAL SEARCH=N