User guide

Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem rCell User Guide 49
37B38BSerial-Port
38BSerial-Port > Serial Port Settings
Serial-Port Configuration
Serial-Port Configuration allows for the configuration of the serial terminal connected to the RS-232 connector DE9 on the back
of the unit.
Baud Rate: Sets the baud-rate at which the serial terminal will be communicating. The default is 115200.
Flow Control: Sets the flow control for the serial port. The selections are None or RTS-CTS. The default is None.
Data Bits: Sets the data bits for the serial port. Data bit selection is 7 or 8. The default is 8.
Stop Bits: Sets the stop bits for the serial port. The selections are 1 or 2. The default is 1.
Parity: Sets the parity for the serial port. The selections are None, Even, or Odd. The default is None.
Buffer Length: Sets the length up to which the data from the serial device is buffered before IP transmission. The
default length is 32-characters.
Timeout: Sets the timeout value for the serial terminal of how long it should wait before IP transmission, The
default is 1-second.
105B115BSubmit Button
Click the Submit button to save these settings.