User guide

Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem rCell User Guide 35
88BNetworks & Services > Service Configuration
On this screen you can specify the standard set of well known services available on the system. These services enable the
configuration of the user-defined services. The options to Delete or Edit a service after it has been defined and added are
available by using the table at the bottom of the screen.
Service Configuration
Enter the Name, Protocol, Source Port/Client, and Destination Port/Server for the new Service.
● A Service Name cannot be edited.
● A Service cannot be deleted if it is used in another configuration.
● Service changes are reflected in all the configurations in the Web Management software where they are used.
● Services added here will be displayed in the following sections: DNAT, Packet Filters.
Name: Enter the name of the Service which is limited to 16 characters. It has to be unique.
Protocol: Enter the type of protocol (TCP, UDP).
Source Port: Enter the Destination Port for this service. The source and destination ports can be entered either
as a single port or a range using a colon as the separator.
Destination Port: Enter the name of the Destination Port for the service.
Add Button: Click the Add button. The new service is added and will display on the screen. Packet Filters