User guide
Table Of Contents
- Revision History
- Revision Date Description
- Trademarks and Logos
- World Headquarters
- Technical Support
- Country By Email By Phone
- Chapter 1 – Product Description and Specifications
- Chapter 2 – Activation and Installation
- Chapter 3 – Using Your Wireless Modem
- Chapter 4 – Troubleshooting and Frequently Asked Questions
- Appendix A - Waste Electrical and Electronic Equipment (WEEE) Statement
Chapter 2 – Activation and Installation
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide 17
Installing the Modem Driver in Windows Server 2008, XP, 2003
This installation assumes a Windows Server 2008, XP or Windows 2003 operating system.
Installing the Serial Port
1. Connect the USB cable between the MultiModem and the PC.
2. Insert the MultiModem CD into your CD-ROM drive. The CD uses the Autorun feature, and after a brief
delay, the MultiModem Setup – Welcome screen appears. Close the Welcome screen.
In some situations the operating system will display a Found New Hardware Wizard screen and asks
you: Can Windows connect to Windows Update to search for software?
Select No, not this time. Then click Next.
2. The Found New Hardware Wizard screen now displays the GSM Device. This is the first of three New
Hardware Wizards that will appear.
3. Click on Install from a list or specific location (Advanced), and then click Next..