User`s guide

Chapter 1 – AT Commands for Remote SIM Application Toolkit
Multi-Tech Systems, Inc. SIM Application Toolkit AT Commands (S000391C) 21
1.4.5 AT^SSTGI Remote-SAT Get Information – Send SS (17)
Write command
AT^SSTGI=17
This command is to be used upon receiving an unsolicited result code ^SSTN:17.
The module is sending a supplementary service request to the network and is
alerting the user of this. Text and an icon identifier can be passed to the TA to display
to the user.
Text and an icon identifier can be passed to the TA to display to the user.
Response
^SSTGI: <cmdType>, [<commandDetails>], [<text>], <iconQualifier>, <iconId>,
<CR>, <LF>
Parameters
<cmdType> 17 – Proactive command ID. See Table 1.
<commandDetails> This byte is RFU.
<text> String
<iconQualifier> Unsigned Integer, range 0 – 255, used as a bit-field.
bit 1: 0 = Icon is self explanatory and replaces text.
1 = Icon is not self-explanatory and shall be displayed
with the text.
Determined value only if associated icon ID is not 0
(an icon exists)..
bits 2 to 8: = RFU
<iconId> 0-255, 0: No icon
1.4.6 AT^SSTGI Remote-SAT Get Information – Send USSD (18)
Write command
AT^SSTGI=18
This command is to be used upon receiving an unsolicited result code ^SSTN:18.
The module is sending a supplementary service request to the network and is
alerting the user of this. Text and an icon identifier can be passed to the TA to display
to the user.
Text and an icon identifier can be passed to the TA to display to the user.
Response
^SSTGI: <cmdType>, [<commandDetails>], [<text>], <iconQualifier>, <iconId>,
<CR>, <LF>
Parameters
<cmdType> 18 – Proactive command ID. See Table 1.
<commandDetails> This byte is RFU.
<text> String.
<iconQualifier> Unsigned Integer, range 0 – 255, used as a bit-field.
bit 1: 0 = Icon is self explanatory and replaces text.
1 = Icon is not self-explanatory and shall be displayed
with the text.
Determined value only if associated icon ID is not 0
(an icon exists).
bits 2 to 8: = RFU
<iconId> 0-255, 0: No icon