User guide

Chapter 3 – Software Installation
MultiModem ISI Server Cards User Guide 50
Port and Modem Installation
Immediately after the ISI Card driver installation is complete, another set of installation wizard screens will appear.
With this installation wizard, you will install ISI ports and modems into the computer's operating system and then
associate the modems with the ports.
This installation sequence occurs very rapidly and is repetitive. The installation wizard may appear to be
"stuck" in an endless loop, but that is not the case. For the ISI-4, the installation wizard must install four ports and
four modems, and must make four modem/port associations. Similarly, for the ISI-8, the installation wizard must install
eight ports and eight modems, and must make eight modem/port associations.
Each port and each modem entails a separate wizard screen sequence.
Port Installation
This is the beginning of a sequence of screens that will be repeated for each port to be installed.
Respond to the wizard screens as follows:
1. If the Welcome to the Found New Hardware Wizard screen – ‘Can Windows connect to Windows update to
search for software?’ appeared when you were installing the driver, it will come up here also.
Select No, not this time. Then click Next.
2. The Found New Hardware Wizard screen appears with Multifunction Device. Select Install from a list or
specific location (Advanced).
3. Then click Next.