User guide

Chapter 3 – Software Installation
MultiModem ISI Server Cards User Guide 22
Driver Installation for Windows Server 2008
If you did not use the pre-installer for Windows, this is the process for installing your modem.
The following driver installation procedure is based on Windows Server 2008 64-bit Operating System. The
procedure may vary slightly for the Windows Server 2008 32-bit Operating System.
Card Driver Installation
1. Power up your computer.
2. Windows Server 2008 will detect the ISI Card. A screen from the tray area, at the bottom right of the screen
will appear briefly Installing Device Driver Software.
3. The Found New Hardware screen appears for Windows to install driver software for your PCI Serial Port.
Click on Locate and install driver software (recommended). Windows will guide you through the process
of installing driver software for your device.
4. A Found New Hardware – PCI Serial Port screen appears and asks: Allow Windows to search online for
driver software for your PCI Serial Port?
Select Don’t search online.