User guide

Chapter 3 – Software Installation
MultiModem ISI Server Cards User Guide 11
Manual Driver Installation for Windows 7
If you did not use the pre-installer for Windows, this is the process for installing your modem.
The following driver installation procedure is based on Win 7 32-bit Operating System. The Win 7 64-bit Operating
System installs in the same manner.
Windows 7 operates differently than the older Microsoft Operating Systems when it is installing drivers, in that it
goes out to Windows Update and searches for the device driver as soon as it detects a new device. This is done in
the background so you don’t even see it is happening. When it does not detect the driver for the new device, it
returns control to you. This is represented in the display of the desk top. In order to get the install going you have to
bring up Control Panel. The device you are installing is displayed in Control Panel, PCI Serial Port. To start things
off, hit on the device, PCI Serial Port and then right click on it and initiate Update Driver Software. This adds the
Multi-Tech ISI5634UPCI/ISI9234PCIe 4 Port Analog Modem Card to the Multi-port serial adapters for the 4-port ISI
card.
Once the 4-port ISI card is installed, the communications ports/multifunction devices are installed for each port on
the ISI card, 4-ports for the ISI-4 or 8-ports for the ISI-8. When the communications port is installed, Windows 7
goes out to Windows Update and pulls in the device driver.
Important Note: If you do not have Internet access, go to the Vista Driver Installation procedures. The screens
may be slightly different, but the intent of the screen is similar. The Vista Drivers Installation procedures do not use
Windows Update, they pull all information from the ISI product CD.
Card Driver Installation
This wizard installs the files for the ISI Card.
1. Power up your computer. Windows 7 goes out to Microsoft Windows Update and searches for the device
driver for the product it detected during the boot up sequence.
2. Go to Control Panel I Systems and click on Device Manager.
Click on PCI Serial Port and then right click. A submenu comes up; now click on Update Driver
Software.