User guide

ManualsBrandsMultitech ManualsComputer equipmentMultiModem DSVD MT5600DSVD

MT5600DSVD and

MT5600DSVD2

Data/Fax/Voice Modem

Quick Start

Summary of content (8 pages)

PAGE 1
MT5600DSVD and MT5600DSVD2 Data/Fax/Voice Modem Quick Start
PAGE 2
MT5600DSVD Quick Start Guide P/N 82081203 Revision D Copyright 2004 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc.
PAGE 3
MultiModemDSVD Quick Start Guide Introduction The purpose of this Quick Start Guide is to help you to quickly set up your modem. A User Guide, which includes a command reference, a troubleshooting chapter, and an index, can be found on the MT5600DSVD System disk in the modem package. The User Guide, which is in Adobe Acrobat format, can be viewed on your monitor or printed out for easy reference. What Is in Your Modem Package? Your modem package has several components.
PAGE 4
MultiModemDSVD Quick Start Guide What You Will Need In addition to the contents of the MultiModemDSVD package, you will need the following items: • • • • • • • A computer with an available serial port A shielded RS-232 serial cable with a male DB-25 connector on one end and a connector to match your computer’s serial port on the other end A nearby AC power outlet A nearby telephone line jack An optional PC stereo microphone An optional amplified speaker or sound card with speakers For connecting to a sou
PAGE 5
MultiModemDSVD Quick Start Guide Step 1: Mount the Feet The modem comes with a strip of self-adhesive plastic feet, which you can optionally mount on the bottom of the modem. To install the feet, simply peel them from their paper strip and press them into the recesses on the bottom of the modem. Step 2: Change the Speaker Jumper To change the speaker jumper, see your User Guide.
PAGE 6
MultiModemDSVD Quick Start Guide RS232 Connection Plug one end of the serial cable into the RS232 connector on the modem and the other end into a serial port connector on your computer, such as COM1 or COM2. Line Connection Plug one end of the phone cable into the modem’s LINE jack and the other end into a phone line wall jack. Note: The LINE jack is not interchangeable with the PHONE jack. Do not plug the phone into the LINE jack or the line cable into the PHONE jack.
PAGE 7
MultiModemDSVD Quick Start Guide Note: Use only the power supply supplied with the modem. Use of any other power supply will void the warranty and could damage the modem. Power-On Test Test the modem by turning it on (a power switch is located on the right side). When you apply power, the modem performs a diagnostic self-test, indicated by several indicators flashing for a second or two, after which the 56 indicator should light.
PAGE 8
Patents This device is covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627; 5,754,589; D394,250; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041; 5,574,725; D374,222; 5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859; 5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425; D361,764; D355,658; D355,653; D353,598; D353,1