Specifications

 Chapter2–ActivatingandInstallingtheModem
Multi‐TechSystems,Inc.MultiModemCellUserGuide 13
6. WhentheDriverSoftwareInstallationwindowstates“Yourdeviceisreadytouse”,yourmodemisinstalled.

VerifyingThatYourModemisProperlyInstalled
1. AfteryouhavesuccessfullyinstalledtheMultiModemdriver,youreturntothePhoneandModemsOptions
window.MakesurethatthemodemisnowlistedunderthecolumnModemandAttachedTo(thecorrect
comport).
2. SelectthemodemandthenclickProperties.
3. APropertieswindowopensfortheMulti‐Techmodem.ClicktheDiagnosticstab.
Inthemiddleofthewindow,clickQueryModem.Windowsqueries theMulti‐Techmodem.Ifthequeryis
successfulagrouponthetabappears,showingthecolumnsCommandandResponse.
4. Ifthisprocesspasses,yourmodemisproperlyinstalledandreadyforuse.ToclosethePropertieswindow,
clickOK.
5. ToclosethePhoneandModemsOptionswindow,clickOK.