User guide

Chapter 16 – Data Commands

Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 95

Set MN-AAA Shared Secrets SPI Values $QCMIPMASPI

Description: This command is used to set MN-AAA SPI values for the currently active profile.

Syntax: Command syntax: AT$QCMIPMASPI =<SPI>,<Val>

Command Possible Responses

AT$QCMIPMASPI?

Note: Display the current setting

$QCMIPMASPI: 1234,1

Note: Command is valid

AT$QCMIPMASPI=?

Note: Display the range of values

$QCMIPMASPI: (0-4294967295),(0-1)

Note: Command is valid

AT$QCMIPMASPI=2300,0

Note: Set value to 2300, but not commit

Note: Command is valid

Values: <SPI> SPI value from 0 to 4294967295

<Val>

0 Do not commit to NV

1 Commit to NV

Note: If the value provisioned is not committed to NV, the temporary value will be deleted.

Set MN-HA Shared Secrets SPI Values $QCMIPMHSPI

Description: This command is used to set MN-HA SPIs for the currently active profile. Two arguments – SPI

value and one of the values: 0 and 1.

Syntax: Command syntax: AT$QCMIPMHSPI =<SPI>,<Val>

Command Possible Responses

AT$QCMIPMHSPI?

Note: Display the current setting

$QCMIPMHSPI: 1234,1

Note: Command is valid

AT$QCMIPMHSPI=?

Note: Display the range of values

$QCMIPMHSPI: (0-4294967295),(0-1)

Note: Command is valid

AT$QCMIPMHSPI=5500,0

Note: Set value to 5500, but not commit

Note: Command is valid

Values: <SPI> SPI value from 0 to 4294967295

<Val>

0 Do not commit to NV

1 Commit to NV

Note: If the value provisioned is not committed to NV, the temporary value will be deleted.