User guide

Chapter 16 – Data Commands
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 94
Set MN-AAA Shared Secrets in HEX $QCMIPMASSX
Description: This command is used to set MN-AAA shared secrets for the currently active profile in HEX. It
should be noted that the length of the shared secret is 16 bytes (128 bits).
Syntax: Command syntax: AT$QCMIPMASSX =<HEX>,<Val>
Command Possible Responses
AT$QCMIPMASSX?
Note: Display the current setting
$QCMIPMASSX: Set
OK
Note: Command is valid
AT$QCMIPMASSX=?
Note: Display the range of values.
$QCMIPMASSX: [0x00-0xff] (max 16 bytes, (0,1)
OK
Note: Command is valid. The length of the shared
secret is 16 bytes (128 bits).
AT$QCMIPMASSX=FFFFFF,0
Note: Set value to 0xFFFFFF, but not
commit
OK
Note: Command is valid.
Values: <HEX> Hex value from 0 to FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF (32 characters)
<Val>
0 Do not commit to NV
1 Commit to NV
Note: If the value provisioned is not committed to NV, the temporary value will be deleted.
Set MN-HA Shared Secrets in HEX $QCMIPMHSSX
Description: This command is used to set MN-HA shared secret for the currently active profile in HEX. It
should be noted that the length of the shared secret is 16 bytes (128 bits).
Syntax: Command syntax: AT$QCMIPMHSSX =<HEX>,<Val>
Command Possible Responses
AT$QCMIPMHSSX?
Note: Display the current setting
$QCMIPMHSSX: Set
OK
Note: Command is valid
AT$QCMIPMHSSX=?
Note: Display the range of values
$QCMIPMHSSX: [0x00-0xFF] (max 16 bytes, (0-1)
OK
Note: Command is valid. The length of the shared
secret is 16 bytes (128 bits).
AT$QCMIPMHSSX=FFFFFF,0
Note: Set value to 0xFFFFFF, but not
commit
OK
Note: Command is valid
Values: <HEX> Hex value from 0 to FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF (32 characters)
<Val>
0 Do not commit to NV
1 Commit to NV
Note: If the value provisioned is not committed to NV, the temporary value will be deleted.