User guide

Chapter 16 – Data Commands
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 91
MIP Selection $QCMIPP
Description: This command is used to select and activate an MIP user profile.
Syntax: Command syntax: AT$QCMIPP
Command Possible Responses
AT$QCMIPP?
Note: Display the current setting
$QCMIPP: 0
Note: User profile 1 is currently used
AT$QCMIPP=2
Note: Set to user profile 2
OK
Note: Command is valid
AT$QCMIPP=?
Note: Display the range of values
$QCMIPP: (0-5)
OK
Note: Command is valid
Note: Takes a profile number between 0 and 5. This value is stored in NV. This AT command is used to
configure Dial-Up Networking. Although 5 is the absolute maximum profile number, the actual
number may be limited by the carrier.
Current Active Profile $QCMIPEP
Description: This command is used to enable or disable the currently active profile.
Syntax: Command syntax: AT$QCMIPEP=<Val>
Command Possible Responses
AT$QCMIPEP?
Note: Display the current setting
$QCMIPEP: 1
OK Note: Command is valid
AT$QCMIPEP=?
Note: Display the range of values
$QCMIPEP: (0-1)
OK Note: Command is valid
AT$QCMIPEP=0
Note: Set value to 0
OK
Note: Command is valid
Values: <Val>
0 Disable the currently active profile (profile is unavailable until it is re-enabled.
1 Enable the currently active profile.
Return Profile Information $QCMIPGETP
Description: This command is used to return all information corresponding to the specified profile number.
Note: The number of MIP user profiles supported is determined by the carrier.
Syntax: Command syntax: AT$QCMIPGETP=<Val>
Command Possible Responses
AT$QCMIPGETP?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCMIPGETP=?
Note: Display the range of values
$QCMIPGETP: (0-5)
OK
Note: Command is valid
AT$ CMIPGETP=0
Note: Set value to 0
Profile:0 Enabled
…..
OK Note: Command is valid
Values: <Val>
(0-5) Profile #
Note: If no profile number is entered, all information corresponding to the currently active profile
is returned. If there is no profile associated with the specified number, an error is returned.
Although 5 is the absolute maximum profile number the actual number may be limited by the
carrier.