User guide

Chapter 16 – Data Commands
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 89
Chapter 16 – Data Commands
Quick Net Connect $QCQNC
Description: This command is used to enable or disable the Quick Net Connect (QNC) feature.
Syntax: Command syntax: AT$QCQNC=<Val>
Command Possible Responses
AT$QCQNC?
Note: Display the current setting
$QCQNC: 0
OK
Note: Command is valid
AT$QCQNC=?
Note: Display the range of values
$QCQNC: (0-1)
OK
Note: Command is valid
AT$QCQNC=1
Note: Enable QNC compatibility
OK
Note: Command is valid
AT$QCQNC
Note: Default – Enable QNC compatibility
OK
Note: Command is valid
Values: <Val>
0 Disable QNC capability. This means that packet Originations will use the Packet Data
Service Option number.
1 Enable QNC capability. This means that Packet Originations will use the
Asynchronous Data Service Option number. Default.
Set Data Service Option $QCSO
Description: This command is used to Set Data Service Option number set; saves to non-volatile memory.
Values: <Val>
0 pre-707 SO numbers (RS 1: Async 4, packet 7; RS 2: Async 12, packet 15)
1 proprietary SO numbers (RS 1: Async 4, packet 7; RS 2: Async 0x8021, packet 0x8020)
2 IS-707 SO numbers (RS 1: Async 0x1004, packet 0x1007; RS 2: Async 12, packet 15)
Syntax: Command syntax: AT$QCSO =<Val>
Command Possible Responses
AT$QCSO?
Note: Display the current setting
$QCSO: 2
OK
Note: Command is valid
AT$QCSO =?
Note: Display the range of values
$QCSO: (0-2)
OK
Note: Command is valid
AT$QCSO =1
Note: Set proprietary SO numbers.
OK
Note: Command is valid