User guide

Chapter 9 – Call Control Commands
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 40
Call Originated +WORG
Description: This response indicates that an attempt to establish a voice call has occurred.
Syntax: Response Syntax: +WORG: <number>
Command Possible Responses
ATD18005551212; OK
+WORG:18005551212
+WCNT:3
OK
Notes:
<number> is the dialing string sent to the base station. You may see extra numbers before the
intended dialing string; this is a result of pre-pended numbers or other call options.
<number> could also be the NULL string if there is no user supplied origination address as in the
case of SMS.
Call Privacy Information +WPRV
Description: This response confirms that the call privacy level has changed during a call.
Syntax: Response syntax: AT+WPRV=<prv>
Command Possible Responses
AT+WPRV=0 OK
+WPRV: 1
Values: <prv>
0 Indicates normal privacy (default)
1 Indicates enhanced privacy
CPHS Command +CPHS
Description: This command is used to activate, deactivate or interrogate a CPHS feature (e.g., Voice Mail
Indicator). When performing an interrogation (mode = 2), the selected <FctId> CPHS feature is
automatically enabled (status = 1).
Note: This command will return +CME ERROR: 3 if the CPHS feature is disabled.
Syntax: Command syntax: AT+CPHS=<Mode>,<FctId>
Command Possible Responses
AT+CPHS=<Mode>,<FctId> OK
AT+CPHS? +CPHS: <Status>,<FctId1><CR<LF>
OK
AT+CPHS=?
Note: display the range of values
+CPHS: (0-2),(1-1)
OK
Values: <Mode>
0 Deactivate a CPHS feature
1 Activate a CPHS feature
2 Interrogate a CPHS status
<FctId>
1 Voice Mail Indicator
<Status>
0 CPHS feature disabled
1 CPHS feature enabled