User guide

Chapter 9 – Call Control Commands
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 38
Call Answered +WANS
Description: This response indicates that a voice call has been answered.
Syntax: Response syntax: +WANS:<ct>
Command Possible Responses
ATA +RING
OK
+WANS:0
Note: Incoming call answered
+WCNT:3
Values: <ct> Call Type
0 Voice
1 Circuit switch data
2 Packet switch data
3 SMS
4 Position determination
6 OTAPA
7 Standard OTASP
8 Non-standard OTASP
9 Emergency
Call Connected +WCNT
Description: This unsolicited response indicates that an incoming or outgoing voice call has been connected
into a traffic channel state. If the service option is not available, +WCNT: will output “NULL”.
Syntax: Response syntax: +WCNT: <so>
Command Possible Responses
ATD18005551212; OK
+WORG:18005551212
+WCNT:3
Note: Call Connected with service option 3
Values: <so> Service option of call.
Speech: 3, 17, 32768
Loopback: 2, 9, 55
OTAPA: 18, 19
Position Determination: 35, 36
SMS: 6, 14
1xdata: 33
Circuit Switch Data: 12