User guide

24
Configurations
1. T1 Line Configuration
2. DS0 Speed/DS0 Allocation
3. Clocking
4. V.35 Port
5. Set configurations
6. Set and Save configurations
7. Reset to Factory Defaults
Enter Selection (-(previous), q(uit), <1>): _
5. At the Configurations menu, enter option 2 and press the ENTER
key to display the DS0 Speed/DS0 Allocation menu.
DS0 Speed/DS0 Allocation
1. DS0 Speed : 64Kbps
2. DS0 Allocation : 1-24
Enter Selection (-(previous), q(uit), <1>): _
6. If the default speed, 64Kbps, is incorrect for your application, enter
option 1 and press the ENTER key to display the DSO Speed
menu. Enter option 2 (56Kbps) and press the ENTER key. this will
return you to the updated DS0 Speed/DS0 Allocation menu.
DS0 Speed/DS0 Allocation
1. DS0 Speed : 56Kbps
2. DS0 Allocation : 1-24
Enter Selection (-(previous), q(uit), <1>): _
7. Enter option 2 and press the ENTER key to display the DS0
Allocation menu. Enter a list of ranges; for example, if the Telco
tells you to use DS0s 1-5, 7, 9 and 12-15, then enter "1-5,7,9,12-
15" and press the ENTER key. This returns you to the updated DS0
Speed/DS0 Allocation menu.
8. Press the minus "-" key, then press the ENTER key to return to the
Configurations menu.