User guide
Table Of Contents
- Product Overview
- Safety Warnings
- Cellular Information
- Installing and Using the Router
- Regulatory Information
- Industry Canada and FCC
- FCC and IC Antenna Requirements Toward License Exempt Radio Transmitters (Bluetooth/Wlan)
- Requirements for Cellular Antennas with regard to FCC/IC Compliance
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
INSTALLING AND USING THE ROUTER
Setting up Wi-Fi and GPS
Some models have Wi-Fi capability. If your device supports this feature, you need to use the device’s web
management interface to enable Wi-Fi. Then, see the online help file for information on working with Wi-Fi.
If your model can support a GPS, also see the online help file for information on working with a GPS.
Resetting the Device
To reset the device, when desired:
1. Find the hole in the panel labeled RESET. The reset button is recessed into the case.
2. To access the reset button, find a pin or similar thin object that can fit through the reset hole.
3. Use the pin to quickly press and release the RESET button.
4. Release the pin from the reset button. The device reboots.
Resetting the Device to Factory Defaults
You can reset the device so that custom configuration settings are cleared and replaced with default configuration
settings. Default settings can include OEM specific settings. To reset the device to factory default settings:
1. Press and Hold the button until the Status LED becomes solid..
2. Release the button for the reset to complete
3. The device reboots.
20 MultiConnect
®
rCell 100 Series Router User Guide