User guide
Table Of Contents
- Product Overview
- Safety Warnings
- Cellular Information
- Installing and Using the Router
- Regulatory Information
- Industry Canada and FCC
- FCC and IC Antenna Requirements Toward License Exempt Radio Transmitters (Bluetooth/Wlan)
- Requirements for Cellular Antennas with regard to FCC/IC Compliance
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
CELLULAR INFORMATION
Cellular Information
Antenna System Cellular Devices
The cellular/wireless performance depends on the implementation and antenna design. The integration of the
antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early
so the performance is not compromised. If changes are made to the device's certified antenna system, then
recertification will be required by specific network carriers.
Cellular Antenna Information
Authorized Antenna/Antenna Specifications for Cellular Bands
The cellular radio portion of the device is approved with the following antenna or for alternate antennas meeting
the given specifications.
Manufacturer: Laird Technologies.
Description: HEPTA-SM
Model Number: MAF94300
Multi-Tech ordering information:
Model Quantity
ANHB-1HRA 1
ANHB-10HRA 10
ANHB-50HRA 50
3G Antenna Requirements/Specifications
Category Description
Frequency Range 824 – 960 MHz / 1710 – 1990 MHz / 1920 – 2170 MHz
Impedance 50 Ohms
VSWR VSWR should not exceed 2.0:1 at any point across the bands of operation
Typical Radiated Gain 850 MHz 3.17 dBi
950 MHz 3.51 dBi
1800 MHz 3.55 dBi
1900 MHz 3.0 dBi
2100 MHz 3.93 dBi
Radiation Omni-directional
Polarization Linear Vertical
16 MultiConnect
®
rCell 100 Series Router User Guide