Specifications


3GPPTS27.007ATCOMMANDS

ATCommandsforHSPA‐H5Modem 88


<recurr>
Stringtype,valueindicatingdayofweekforthealarminoneofthe
followingformats:
“<1..7>[,<1..7>[,…]]”
Setsarecurrentalarmforoneormoredaysintheweek;thedigits
1to7correspondstothedaysintheweek.Mondayis1.
“0” Setsarecurrent
alarmforalldaysintheweek.
<silent> Integertypeindicatingifthealarmissilentornot.
0 Thealarmisnotsilent.
1 Thealarmissilent.

Duringthe"alarmmode"thedevicedoesnotmakeanynetwork
scananddoesnotregistertoanynetworkandtherefore
isnotable
todialorreceiveanycallorSMS,theonlycommandthatcanbe
issuedtothemoduleinthisstateis#WAKE.Allothercommand
mustnotbeissuedduringthisstate.
Note:YoumustsettheRTC(issuing+CCLK)atleastoncebeforeyou
can
issue+CALAwith<type>=8.
Notes
 Reference:ETSI07.07,ETSI27.007.
Examples
AT+CALA="02/09/07,23:30:00+00"
OK
DeleteAlarm+CALD
ExecutecommanddeletesanalarmintheME.
Testcommandreportstherangeofsupportedvaluesfor<n>parameter.
Syntax
Command Commandtype
AT+CALD=<n> Execute
AT+CALD=? Test
ParametersandValues
<n> 
0 
Notes
 Reference:3GTS27.007