Specifications

GPSATCOMMANDSSET


301 ATCommandsforHSPA‐H5Modems

ParametersandValues
<mode> 
0 Disableunsolicited.Default:0.
1 Enableunsolicited.
 Theunsolicitedresultcodeisintheformat:
$LICLS:<request_type>[,<cid>]
where
<request_type>
0–Setuprequesttosetupthecontrollink.
1–Releaserequesttoreleasethecontrollink.
<cid>:IDassociatedtothecontextthatis
deactivated(see+CGDCONT).

Ifthe<request_type>isasetuprequest,theunsolicitedindicationissent/usedto
requesttheclienttodefine,setup,activateandpreparethepdp‐context.
If<request_type>isareleaserequest,theunsolicitedindicationissent/usedto
informtheclientthatthepdp‐context(associatedwiththiscommand
type)
includingtheassociatedterminalisnotusedanymore,andisdeactivated.
MTLocationRequestMode$LCSLRMT
Setcommandenablesordisablesunsolicited$LCSLRMTresponse.
Readcommandreturnsthecurrentvalueofparameter<mode>.
Testcommandreturnstherangeofvaluesforparameter<mode>.
Syntax
Command Commandtype
AT$LCSLRMT=<mode> Set
AT$LCSLRMT? Read
AT$LCSLRMT=? Test
ParametersandValues
<mode> 
0 Disableunsolicited.Default:0.
1 Enableunsolicited.
Notes
Theunsolicitedresultcodeisintheformat:
$LCSLRMT:<transport_protocol>,<Notif_type>,<Loc_estimate_type>,<Client_Id>,<Client_NameEncoding_type>, 
<Client_Name_Type>,<Client_Name>,<Requestor_Id_Encoding_type>,<Requestor_Id_Type>,
<Requestor_Id>,<Codeword>,<Service_Type_id>,<re qid>
where: