Specifications

CUSTOMATCOMMANDS


203 ATCommandsforHSPA‐H5Modems

TestcommandreturnsthesupportedvaluesfortheTCPATRUNDparameters.
Syntax
Command Commandtype
AT#TCPATRUND=<mod> Set
AT#TCPATRUND? Read
AT#TCPATRUND=? Test
ParametersandValues
<mod> 
0 Servicedisabled.
1 Serviceenabled.
Notes
 IfSMSATRUNisactiveonthesameinstance(seeAT#TCPATRUNC FG)thecommandreturnsERROR.
 WhentheserviceisactiveitisonaspecificATinstance(seeAT#TCPATRUNCFG),thatinstancecannotbeused
foranyotherscope.Forexampleifthemultiplexerrequesttoestablishtheinstance,therequestisrejected.
 Thecurrentsettingarestoredinnon‐vo latilememory
 Tostartautomaticallytheservicewhenthemoduleispowered‐on,theautomaticPDPcontextactivationhasto
beset(seeAT#SGACTCFGcommand).
 Iftheconnectionclosesorwhenthemodulereboots,ifserviceisenabledandcontextisactive,themoduletries
toreconnectforthenumberofattemptsspecifiedinAT#TCPATRUNCFG.Thedelaybetweenoneattemptand
theotherisspecifiedinAT#TCPATRUNCFG
ClosingTCPRunATSocket#TCPATRUNCLOSE 
ClosesthesocketusedbyTCPATRUNservice.
Note:TCPATRUNstatusisstillenabledafterthiscommand,sotheservicere‐startsautomatically.
TestcommandreturnsOK.
Syntax
Command Commandtype
AT#TCPATRUNCLOSE
AT#TCPATRUNCLOSE=? Test
TCPRunATCommandSequence#TCPATCMDSEQ
Setcommandenable/disable,forTCPRunATservice,afeaturethatallowsgivingmorethanoneATcommand
withoutwaitingforresponses.
Itdoesnotworkwithcommandsthatusetheprompt'>'toreceivethemessagebodytext(forexample
“at+cmgs”)
Readcommandreturnsthecurrentsettingsofparametersin
theformat:
#TCPATCMDSEQ:<mod>
TestcommandreturnsthesupportedvaluesfortheTCPATCMDSEQparameters.