Specifications

CUSTOMATCOMMANDS


193 ATCommandsforHSPA‐H5Modems

16‐HAMR,AMRhalfratemodeenabled

(if<format>=1)
<codec_used>‐oneofthefollowingchannelmodes:
None–noTCH
FR‐fullratespeech1onTCH
EFR‐fullratespeech2onTCH
HR‐halfratespeech1onTCH
FAMR‐fullratespeech3–AMRonTCH
HAMR‐halfratespeech3–AMR
onTCH
FD96‐fulldata9.6
FD48‐fulldata4.8
FD24‐fulldata2.4
HD48‐halfdata4.8
HD24‐halfdata2.4
FD144‐fulldata14.4

<codec_setn>
FR‐fullratemodeenabled
EFR‐enhancedfullratemodeenabled
HR‐halfratemodeenabled
FAMR‐AMR
fullratemodeenabled
HAMR‐AMRhalfratemodeenabled

Note:Thecommandreferstocodecinformationinspeechcallandtochannelmodeindatacall.
Note:IfAT#CODECis0,thereportedcodecsetfor<format>=0is31(allcodec).
SelectLanguage#LANG
Setcommandselectsthecurrentlyusedlanguagefordisplayingdifferentmessages.
Readcommandreportsthecurrentlyselected<lan>intheformat: