Specifications


CUSTOMATCOMMANDS

ATCommandsforHSPA‐H5Modem 192

#CODECINFO:<codec_used>,<codec_set>

(if<format>=1)
#CODECINFO:<codec_used>,<code c_set1>
[,<codec_set2>[..[,codec_setn]]]

Thereportedvaluesare:

(if<format>=0)
<codec_used>‐oneofthefollowingchannelmodes:
0–noTCH
1‐fullratespeech1onTCH
2‐fullratespeech2onTCH
4‐halfratespeech1onTCH
8‐fullratespeech3–AMRonTCH
16‐halfratespeech3–AMR
onTCH
128–fulldata9.6
129–fulldata4.8
130–fulldata2.4
131–halfdata4.8
132–halfdata2.4
133–fulldata14.4

<codec_set>
1..31‐sumofintegerseachrepresentingaspecificcodecmode:
1‐FR,full
ratemodeenabled
2‐EFR,enhancedfullratemodeenabled
4‐HR,halfratemodeenabled
8‐FAMR,AMRfullratemodeenabled