Specifications

CUSTOMATCOMMANDS


177 ATCommandsforHSPA‐H5Modems

1 EnablePSNTunsolicitedresultcode.
SIMPresenceStatus#SIMPR
SetcommandenablesordisablestheSIMPresenceStatusunsolicitedindicationintheME.Thiscommandreports
alsothestatusoftheremoteSIM,iftheSAPfunctionissupportedandisenabled.
Readcommandreportswhethertheunsolicitedindication#SIMPRiscurrentlyenabledornot,alongwiththelocal
and
remoteSIMstatus,intheformat:
#SIMPR:<mode>,0,<status><CR><LF>
#SIMPR:<mode>,1,<status>
IfSAPfunctionisnotsupportedorenabledtheremoteSIMstatusisalways0.
Testcommandreportstherangefortheparameter<mode>.
Syntax
Command Commandtype
AT#SIMPR=[<mode>] Set
AT#SIMPR? Read
AT#SIMPR=? Test
ParametersandValues
<mode> Notificationtype.
0 Disabled.Default:0.
1
Enabled.TheMEinformsatevery(localandremote)SIMstatuschangethrough
thefollowingunsolicitedindication:
#SIMPR:<SIM>,<status>
where:
<SIM>‐localorremoteSIM
0localSIM
1remoteSIM
<status>‐currentSIMstatus
0‐SIMNOTINSERTED
1‐SIMINSERTED
Notes
 
CallForw ardingFlags#CFF
Setcommandenablesordisablesthepresentationofthecallforwardingflags URC.
ReadcommandreportsifthepresentationofthecallforwardingflagsURCisenabledand,iftheflagsfieldis
presentintheSIM,thecurrentstatusofthecallforwardingflagsastheyarecurrentlystoredon
SIM,andthe
numberincomingcallsareforwardedto.Theformatis:
#CFF:<enable>[,<status>,<fwdtonum >]
Testcommandreturnstherangeofavailablevaluesforparameter<enable>.