User guide

48
MTPSR3-100 User Guide
4 Click on the Bindings tab.
5 In the Show Bindings for drop down list, select all adapters. A list of all adapters is
displayed.
6 Double click on the entry for your Ethernet card adapter to expand the list of bindings. Verify
that TCP/IP Protocol is included in the bindings below your adapter.
Note: There may be other protocols in the list under your Ethernet adapter. This does not
affect the TCP/IP protocol. Rather, it simply means your computer will accept messages
using those protocols as well as TCP/IP.
7 Click on the Protocols tab.