User guide

MTPSR3-100 User Guide

Installing TCP/IP (Win95/98)

If TCP/IP is not already installed, perform the following steps:

Note: For this procedure you may need your Windows installation disks or CD ROM.

1 In the Network dialog, click Add. The Select Network Component Type dialog is displayed

with a list of installation options.

2 Select Protocol and click Add. The Select Network Protocol dialog is displayed with

protocol options.

3 In the Manufacturers list click on the manufacturer option (Microsoft in the example) to

highlight it. A list of available protocols will appear in the Network Protocols list.

4 In the Network Protocols list, select TCP/IP and click OK.

5 Exit the add option. Click on the OK button.

Note: If Windows does not find the necessary files on the hard drive, click Have Disk and

follow the on-screen instructions for loading TCP/IP from the installation disks/CD-ROM.

6 Reboot your PC for changes to take effect.

7 Click Start | Settings | Control Panel and double-click on the Network icon to return to the

Network dialog. Return to step 3 of the Configuring in Windows 95/98 and continue with

the client setup procedure.