User guide

44
MTPSR3-100 User Guide
12 Click on the DNS Configuration tab. Verify that Enable DNS is selected (checked).
13 In the Host field, enter your user name (i.e., jerry).
14 In the Domain field, enter your company’s domain name (usually the company name
followed by one of the following extensions: .com, .edu, .gov, .org, .mil, or .net. For example,
multitech.com).
15 In the DNS Server Search Order group, place the cursor in the first group of the address
field and type the IP address of your LAN’s DNS server (provided by your network
administrator). Click Add and the new address appears in the list below the address field.
Your network may have more than one DNS server, allowing you to use a secondary DNS
server if the primary DNS server is not available. If this is the case, add the IP address of the
secondary DNS server using the same procedure as with the first.
Note: The address that appears first (at the top) of the list is the primary server (the first one
searched). You can “drag and drop” the items in the list, if necessary, until the primary DNS
server is listed first.
When this is done, click OK. You are returned to the Network dialog.