User guide

42
MTPSR3-100 User Guide
8 If DHCP Services are NOT active on the ProxyServer, you will have to manually enter your
IP address. Select manual addressing by clicking the Specify an IP address option. The IP
Address and Subnet Mask fields become active.
9 In the IP Address field, type the IP address assigned to your PC.
Remove the default IP address (if any), and begin typing the new address. This address is
entered in dotted decimal notation, and is comprised of four groups (octets) separated by
periods or “dots.” If a group has fewer than 3 digits, type the necessary digits an press the
space bar to move to the next group. When you are finished, verify that the IP address is
identical to the IP address you were given for your PC.