Manualshelf

User guide

ManualsBrandsMultitech ManualsComputer equipmentMTPSR3-100
31323334353637383940
40
MTPSR3-100 User Guide
3 Check for binding between the adapter and TCP/IP. In the Network dialog, click on your
Ethernet adapter to select it, then click Properties to display the Adapter Properties window.
4 Click the Bindings tab, then if necessary click on the box to the left of TCP/IP so this entry is
enabled (checked).
Note: There may be other protocols listed and enabled under your Ethernet adapter. This
does not affect the TCP/IP protocol. Rather, it simply means your computer will accept
messages using those protocols as well as TCP/IP.
Click OK to return to the Network dialog.