User guide

Chapter 5 - Client Setup

Configuring in Windows 95/98

Perform the following steps to set up your Windows 95/98 PC:

Note: All of the hardware and screens used in this section are intended as examples only. Please

select options appropriate to your system.

1 Click Start | Settings | Control Panel and then double click on the Network icon.

The Network dialog appears displaying the Configuration tab, which shows all the

components (i.e., clients, adapters, protocols, and any services) installed on your PC.

2 If TCP/IP is listed, proceed to step 3; otherwise, refer to Installing TCP/IP (Win95/98), at the

end of this section.