User guide

27
Chapter 4 - ProxyServer Software
Proxy Setup
The Proxy Setup menu consists of 13 buttons, ten of which allow you to display and change the
IP protocol, define the WAN ports, change features such as the Internet, DHCP server,
ProxyServer, and Virtual servers, display Statistics on the WAN ports, test the communications
link, print messages received from the target ProxyServer, and download setup information to the
ProxyServer.
Note: The Other button is not supported on the MTPSR3-100, and the Built In Test, and Print
Console buttons, shown as active in the screen below, are only active when the ProxyServer is
directly connected to the PC. When connecting via the LAN, these options will be inactive
(grayed out).
In the bottom row, there are two buttons to open the online Help system (Help) and end a Proxy
Setup session (Exit).