User guide

23
Chapter 3 - Software Loading and Configuration
17 During the reboot, the BT (Boot) LED will be on. Wait for the BT LED to go off before
proceeding. Once the configuration has been written to the ProxyServer, you are returned to
the Multi-Tech Installation CD screen.
At this time your ProxyServer is fully operational. It is recommended that you verify that each client
PC has an IP stack loaded, workstation IP address assigned, gateway pointed to the ProxyServer,
and that the DNS name(s) supplied by the ISP are entered. Refer to Chapter 5 - Client Setup for
more details. Once verified, your clients are ready to access the Internet.