User guide

22
MTPSR3-100 User Guide
WAN Link(s) Wizard Setup
The WAN Link(s) Wizard Setup guides you through two main processes. First you are instructed to
enable (if you choose) MultiLink Point to Point Protocol (MLPPP), which binds the WAN ports
together. And second, you are guided through the configuration of each WAN link, including the
determination of the Data Communications Equipment (DCE) device type attached to each link
(modem, DSU, etc.), and the configuration of the User Name, Password and Dial Number (all
negotiated with the ISP providing the Internet access).
Note: As noted in the Wizard, in order to use MLPPP, the User Name and Password for all WAN
ports must be identical.
14 Follow the on-screen instructions to set up your WAN ports.
15 Click OK to finish installing the software. The following dialog box is displayed.
16 Click OK to download load the new configuration. The following dialog box is displayed as
the configuration is written to the ProxyServer.