User guide
19
Chapter 3 - Software Loading and Configuration
4 Press Enter or click Next> to continue.
5 Follow the on-screen instructions to install your ProxyServer software.
6 Once the software is loaded, the Serial Proxy Server dialog box asks if you are configuring
your ProxyServer over the LAN or directly connected to the Command port.
If you are configuring the ProxyServer via your network, click OK to continue.
If you need to configure your ProxyServer via the Command port, follow the instructions in
the dialog box for selecting the COM Port and click OK to continue.
The Setup Complete dialog box is displayed.
7 Click Finish to continue. The following dialog is displayed.
Proceed to the next section, Wizard Setup, to continue the software configuration