User guide

18
MTPSR3-100 User Guide
Loading Your ProxyServer Software
The ProxyServer software and User Guide are contained on the ProxyServer CD. The CD is auto-
detectable, so when you insert it into your CD ROM drive it will start up automatically. When you have
finished configuring your ProxyServer, you can view and print the User Guide by clicking on the
Install Manuals icon.
1 Before you begin installing the software, you need to determine how you are going to
configure your ProxyServer, via the LAN or connected directly to the command port. If you
are configuring your ProxyServer via your network, you need to have your PC configured for
network communications (i.e., TCP/IP stack loaded) and this PC and the ProxyServer must
be on the same physical LAN segment. If you need to load the TCP/IP stack, refer to the
Chapter 5 - Client Setup.
2 Insert the ProxyServer CD into your CD ROM drive. The CD is auto-detectable, so it starts
automatically. It may take 10 to 20 seconds for the Multi-Tech Installation CD screen to
appear.
Note: If your system is not configured to support autorun, you can start the Installation CD by
browsing the contents using My Computer (on your Windows desktop). Double click on My
Computer. Right click on the CD ROM drive icon and select Open. Double click on
Autorun.exe.
The Multi-Tech Installation CD screen appears.
3 Click Install Software. The Welcome screen is displayed.