User guide

14
MTPSR3-100 User Guide
Introduction
This chapter is organized to guide you through the unpacking and installation of your ProxyServer.
The unpacking section describes the contents of the shipping box and shows how the ProxyServer is
packaged. The cabling section describes each cable connection and shows where that cable is
connected to the ProxyServer. Software loading and installation will be covered in Chapter 3.
Unpacking Your ProxyServer
The shipping box contains:
• ProxyServer (1)
• Quick Start Guide (1)
• ProxyServer CD with the ProxyServer Software and User Guide in Adobe Acrobat
TM
format (1)
• RJ-45 to DB-25 cables (3)
• external power supply (1)
• RJ-45 to DB-9 Command Port cable (1)
Inspect the contents for signs of any shipping damage. If damage is observed, do not power up the
unit, contact Multi-Tech’s Technical Support for advice (refer to Chapter 6). If no damage is observed,
place the ProxyServer in its final location and perform the Cabling procedures that follow.
Save the shipping box in case reshipment is necessary.
MADE IN U.S.A
MADE IN U.S.A
www.multitech.com
Figure 2-1. Unpacking