User guide

Software
15
10. In the WAN 2 group, configure the parameters of the
external DCE device attached to the WAN 2 port. If the
external device is a modem, click on the drop down list in
the Modem Type field and choose the proper modem
type. The enter the proper dial number in the Dial Number
field. Assign the User Name and Password for WAN port
2, as agreed upon with you ISP.
If you do not wish to use the WAN 2 port, click on the
Enable check box disable WAN 2.
When you are finished, click OK to continue with the
installation.
11. The configuration is written to the ProxyServer and the
following screen is displayed.
12. After the setup is written to the ProxyServer, the unit is
rebooted.
13. Check to ensure that the FAIL LED on the ProxyServer is
off after the download is complete and the ProxyServer is
rebooted.
27. Win3.1 users - you are returned to your Program
Manager where the ProxyServer Program Group and
Program Item (Windows icons) have been created.
Win95 users - you are returned to your ProxyServer
folder which will be visible on your desktop.
Your ProxyServer is operational at this time.