User guide

DSU ProxyServer Quick Start Guide
14
8. Select the proper port from the Port Selection list.
By default, LAN is selected. Enter the the valid IP
Address and Net Mask assigned by your ISP.
Highlight WAN 1, and choose either ISP Assigns
Dynamic Address (default) to allow the ISP to
automatically assign the ProxyServer IP address and Net
Mask, or disable ISP Assigns Dynamic Address by
clicking the check box, and statically assign the IP
Address and Net Mask.
If you wish to configure the WAN 2 port, highlight WAN 2
either configure it as you did with WAN 1, above, or click
Remote Access to enable support of Remote Access
Server (RAS) on WAN port 2. If you enable Remote
Access, you must assign the address of the remote server
in the Remote Address field.
When you have completed the IP port configuration, click
OK to continue.
9. The Default WAN Link(s) Setup dialog is displayed.
In the WAN 1 (DSU) group, enter the User Name and
Password for WAN port 1, as agreed upon with your ISP.
Click on the Enable check box if you wish to disable WAN 1.