User guide

Software
11
Loading your Software
The following loading procedure does not provide every
screen or option in the process of installing the ProxyServer
software. The assumption is that a technical person is doing
the installation and that a thorough knowledge of Windows and
the software loading process is understood. Additional
information on the ProxyServer software is provided in the
User Guide supplied with your ProxyServer.
1. Run Windows on the PC connected to the Command Port.
2. Insert the ProxyServer diskette labeled Disk 1 into the disk
drive on the PC connected to the Command port.
3. Win3.1 users - access the setup program in the File
Manager by clicking File | Run. In the Run dialog box,
type a:\setup or b:\setup (depending on the location of
your floppy disk drive) in the Command Line field and then
click OK.
Win95 users - click Start | Run. In the Run dialog box
click on the down arrow and choose a:\setup or b:\setup
(depending on the location of your floppy disk drive) in the
Command Line field and then click OK.