User guide

24
DSU ProxyServer User Guide
Introduction
This chapter describes the Proxy Server software from an applications standpoint, showing how
to make changes in the configuration with recommendations on the impact of any such changes.
The major configuration parameters were set when the software was loaded into your PC and the
setup configuration was downloaded to the ProxyServer at the conclusion of the software
installation. The Proxy Server software is designed for the Microsoft Windows
TM
environment.
Recommendations are provided to explain that changing parameters may affect your unit in a
certain way. Our intent is not to cover every dialog box nor every field within a dialog box. The
ProxyServer on-line help provided with your software provides such definitions, along with
explanations of parameters and defaults where applicable. This constitutes a dynamic help
system in that the information presented always relates to the dialog box or window that is
currently open.
Before You Begin
Your Proxy Server 2.01 program group contains several applications which provide the maximum
flexibility for configuration and use. These utilities are accessible in Windows by clicking Start |
Programs | Proxy Server 2.01 | (utility) . The various options include Configuration Port Setup,
Download Default Setup, Download Firmware, Proxy Server Configuration, Remote User Data
Base, Uninstall Proxy Server Configuration and Wan Device Configuration. Proxy Server
Configuration will be discussed in detail later in this chapter. A brief description of the other
components is provided here:
Download Firmware
This utility allows you to download the firmware of the ProxyServer. This may be necessary in the
case of repair or upgrade. To download the firmware, choose Download Firmware from the
Proxy Server 2.01 program group, and the Open dialog box is displayed (if the ProxyServer is
running, you will be queried to reboot to update firmware; click OK to proceed and the Open
dialog will be displayed).
By default, the software will display the proper firmware from the Proxy Server folder. Double
click on this file in the File Name list.
The Downloading Code dialog is displayed, which includes a status bar to monitor the download.
When the download is complete the ProxyServer will reboot. This process will take several
minutes. After rebooting, you will be returned to Windows.
Configuration Port Setup
The Configuration Port Setup utility allows you to set up and configure the command port on your
ProxyServer. This dialog is included in the initial installation process. Although parameters can be
changed, be sure to note the current status of the software before making any alterations.
When you installed the ProxyServer software, you selected to configure the port as either an IP
or COM Port. When COM Port is selected, you can assign the proper COM Port and define the
modem Init String, Dial String, and various responses. If IP is selected, you can assign a static IP
address or select one from the drop down list. For more information on each individual
parameter, refer to the on-line help provided with the software.