User guide

MTPSR2-201 89
Chapter 8 - ProxyServer Management
Web Browser Management
The ProxyServer can be accessed from anywhere on the connected Internet via the built-in Web
Browser interface. You must check this option in Other setup to enable the function. Depending on
the rights of the user (read/write, or read only), it is possible to view the current parameters and
statistics of the ProxyServer as well as configure and download setup changes to the ProxyServer.
You can access ProxyServer configuration by typing the IP Address of the unit into the address line
of your web browser. In this example, the IP address is 192.168.0.1.
Click the word Login to gain access to the ProxyServer configuration program. The following screen
is displayed:
Enter the proper User Name and Password, then click OK. For the default setup you would type
supervisor in the User Name field (no password is needed) and click OK; however, if a password has
been entered in the Password field on the Others dialog box, you must enter that password.